Exhaust

General chat about the car goes in here.
Post Reply
Foster48x

Exhaust

Post by Foster48x »

Question. Is it possible to remove the entire exhaust system in one piece from the down pipe to the muffler on a 80FI?

Thanks,
Rick
User avatar
divace73
Posts: 1380
Joined: Sun Oct 17, 2010 5:59 am
Your car is a: 1980 Fiat 124 Spider Silver
Location: Sydney, Australia

Re: Exhaust

Post by divace73 »

I imagine the diff would get in the way?
Cheers David
-=1980 silver Fiat 124 Spider=-
If you want to see pics of my car (and other random stuff) >>click here<< OR
see my >>You tube channel<<
User avatar
azruss
Posts: 3659
Joined: Sun May 30, 2010 12:24 pm
Your car is a: 80 Fiat 2000 FI

Re: Exhaust

Post by azruss »

In a word, no.
the problem child is the rear axle. not far behind is the front crossmember. put the two together and you have mission impossible.
TX82FIAT
Posts: 1814
Joined: Mon May 03, 2010 11:04 am
Your car is a: 82 Fiat Spider 2000 CSO
Location: San Antonio

Re: Exhaust

Post by TX82FIAT »

I guess the next question would be why. What are you trying to accomplish? Is the system so old that you will need to cut it out in pieces or are you looking for a quick disassembly? Ray
Buon giro a tutti! - enjoy the ride!

82 Fiat Spider 2000
03 BMW M3
07 Chevy Suburban
Foster48x

Re: Exhaust

Post by Foster48x »

Ray, a while back I cut the cat out of the exhaust and temporarily installed a flex pipe in its place. Since I didn't have any problems passing the safety inspection without the cat this last time I've decided to weld in a more permanent straight pipe in its place. Right now I have it off of the car from the header to the muffler and figured it might go back in with some creative angles as one piece. I now have to agree with you guys that getting it back in there as a single piece will be just about impossible. I've decided to just weld the straight pipe to the back half of the exhaust, install everything, and clamp and seal both pipes where they meet.



Rick
Post Reply